DESCRIPTION:
Magic for Stone, when used in conjunction with Pro Poultice removes stains caused by Wine, Coffee, Tea, Catsup, Mustard, and more.

DIRECTIONS:
1. Place an appropriate quantity of “Pro Poultice” into a clean mixing cup.
2. Add “Magic for Stone” in  sufficient quantity to form a semi-liquid gel.
3. Cover the stain and an area extending one inch around the mixture. Poultice should be at lease 1/4 inch thick.
4. Allow 24 hours for poultice to dry completely.
5. Vacuum or sweep away poultice powder.

Click here for the MSDS

DESCRIPTION:
Pro Solve Gel digs deep to remove oil and grease from porous stone and grout. Effective removal requires the use of a solvent to dissolve the oil and a poultice to draw the oil out of the stone. Here’s the procedure.

DIRECTIONS:
1. Cover the spot and a one inch area extending around the spot with Pro’s Choice “Pro Solve Gel”. The “Pro Solve Gel” should be about 1/8th inch thick.
2. Cover the “Pro Solve Gel” with Pro’s Choice “Pro Poultice”. Apply the poultice powder by sprinkling the powder over the “Pro Solve Gel” and a one inch area extending around the “Pro Solve Gel”. The poultice powder should be approximately 1/4 inch thick.  DO NOT PRESS THE POULTICE POWDER INTO THE “PRO SOLVE GEL”.
3. Allow 24 hours dwell time.
4. Sweep or vacuum away the poultice.  For severe deposits you may need to repeat the procedure.

Click here for the MSDS

DESCRIPTION:
Pro Poultice is used in conjunction with Pro Solve Gel or Magic for Stone to draw stains out of stone, tile & grout.

DIRECTIONS:
For water-born stains such as coffee, soda, tea, wine, juices etc. You will use Pro Poultice in conjunction with Magic for Stone.

For oil-born stains such as salad dressing, cooking oil, animal fat, etc. you will use Pro Poultice in conjunction with Pro-Solve Gel.  Refer to Magic for Stone or Pro-Solve Gel for the procedures.

Click here for the MSDS